Part Number Hot Search : 
ATTINY GB302 PIC12F A1211 HC274 STLS10 TODV1240 P3500
Product Description
Full Text Search
 

To Download SK-B29B0-FREQ Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SK-A29B0 Series
Differential Positive ECL (DPECL) SK-A29B0 Series Rev D
Frequency Range: 350.0 MHz to 1.7 GHz
Description The SK-A29B0 Series of quartz crystal oscillators provide DPECL Fast Edge compatible
signals. This device is to operate using positive voltage and uses multiple ground pins for improved signal integrity. This device is intended to operate on positive voltage for PECL applications.
Size, mm
20 x 13
Features
* High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions * Low jitter - Wavecrest jitter characterization available * Wide frequency range--350.0 MHz to 1.7 GHz * User specified tolerance available * Case at electrical ground * Will withstand SMD reflow temperatures of 253C for 4 minutes maximum
I/O
8 pin (14 pin) SMD Gull Wing
Supply Voltage
3.3V / 2.5V
* All metal, resistance weld, hermetically sealed package * High shock resistance, to 1500g * High Q Crystal actively tuned oscillator circuit * Power supply decoupling internal * High frequencies due to proprietary design * RoHS complaint, lead free construction
Creating a Part Number
Package Code HK Leaded 8 pin (14 pin) SK 8 pin (14 pin) SMD Gull Wing Input Voltage Code Specification A 3.3 V B 2.5 V
SK - A29BX - FREQ
Tolerance/Performance 0 100 ppm 0-70C 1 50 ppm 0-70C 7 25 ppm 0-70C 9 Customer Specific A 20 ppm 0-70C B 50 ppm -40 to +85C C 100 ppm -40 to +85C
Drawing Specifications
Electrical Connections Pin Connection 1 VCC 2 VEE Case 6 VEE Case 7 Output 8 /Output 9 VEE Case 13 VEE Case 14 Enable/Disable
For the most up to date specifications on each NEL product, log on to our website--www.nelfc.com
All other pins are no connect
Dimension shown in inches and (mm).
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone: 262-763-3591 Fax: 262-763-2881 Email: nelsales@nelfc.com www.nelfc.com
B9
Differential Positive ECL (DPECL) SK-A29B0 Series Rev D
Frequency Range: 350.0 MHz to 1.7 GHz
Operating Conditions and Output Characteristics Electrical Characteristics Parameter Symbol
Frequency Duty Cycle Logic 0(1) Logic 1(1) Rise & Fall Time Jitter, RMS(4) Enable Voltage(2) Disable Voltage Frequency Stability(3)
-- -- 350.0 MHz -- @50% points 45/55% VOL -- VCC -1.810 V VOH -- VCC -1.025 V tr, tf 20-80% VO with 50 ohm load to VCC -2V -- -- -- -- -- with VEE = 0V 0V -- with VEE = 0V 3.0 V dF/F Overall conditions including: -100 ppm voltage, calibration, temp., 10 yr aging, shock, vibration
Conditions
Min
Typical
-- -- -- -- 350 psec 0.3 psec -- -- --
1.7 GHz 55/45% VCC -1.620 V VCC -0.880 V 600 psec 0.5 psec 1.0 V VCC +100 ppm
Max
General Characteristics Parameter Symbol
Supply Voltage Supply Current VCC ICC
Output Current IO 0.0 mA Operating Temperature TA 0C Storage Temperature TS -55C Input: Logic High (ECL) - Disables VEE or Open - Enables Lead Temperature TL Soldering, 10 sec. -- Load 50 ohm to VCC-2V or Thevenin Equivalent, Bias Required Start-up Time tS -- --
3.3V5% 50 ohm termination To 2.00V below VCC Low level Output Current -- --
Conditions
3.135 V 0.0 mA
Min
Typical
3.3 V -- -- -- -- -- 2 ms
3.465 V 160 mA 50.0 mA 70C 125C 300C 10 ms
Max
Environmental and Mechanical Characteristics
Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal
Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g's 55 Hz to 2000 Hz 300C for 10 seconds Leak rate less than 1 x 10-8 atm.cc/sec of helium
Footnotes: 1) VOL, VOH, referenced to ground. 2) Open to Enable pin also enables the output. 3) Standard frequency stability (others available). 4) Jitter performance is frequency dependent. Please contact factory for full Aeroflex characterization. RMS jitter bandwidth of 12kHz to 20MHz.
Test Circuit
1 8
7 2,6,9,13
Test Circuit uses a split supply of +2V and -1.3V for ease of testing.
B10


▲Up To Search▲   

 
Price & Availability of SK-B29B0-FREQ

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X